Stone and Tile Cleaning Products 
Stone and Tile Care, Maintenance and Products from Natural Stone Restoration New Zealand  

 

MARBLE, GRANITE & MORE FLOOR CLEANER

Highly recommended for all stone cleaning and tile cleaning, this is PH neutral and rinse-free, it maintains a natural streak-free look on Marble, Granite, Ceramic, Porcelain, Hardwood and any other hard surface not harmed by water. Just add 1 to 3 Fl. Oz.
(2 to 6 capfuls) according to soil conditions with 4ltrs of warm water. No rinsing required.

Available in 1 Ltr-65 Washes & 4 Ltr-260 Washes Order this Tile Cleaning Product for NZ Wide Delivery

 

HEAVY DUTY STONE & GROUT CLEANER

Highly recommended for deep stone cleaning such as Granite, Marble, Limestone, Travertine, Porcelain and Ceramic tiles and a perfect grout cleaner.

A powerful heavy-duty alkaline cleaner designed to tackle the most demanding cleaning job on tiles, grout and all natural stones.

Available in 1 Ltr4 Ltr Order this Tile Cleaning Product for New Zealand Delivery

 

Soaps:

Natural soaps are low-tech, inexpensive and user friendly to clean your stone or tile floors. They are also capable of providing a sealing and/or dressing function for stone floors. Vegetable based soaps are best. Specialty cleansers formulated for use on stone are highly recommended and desirable on most natural stone floors and other stone surfaces.

Detergents:

These are synthetic surface-active agents (surfactants) that are very good at picking up soils and emulsifying grease and oil from stone or tile floors. They make water "wetter" and more effective for cleaning purposes. The detergent used for stone cleaning should be carefully evaluated for compatibility with the stone. Detergents are typically used with water and may determine the ph of the cleaning solution. Detergents tend to leave the stone very "raw" or absorbent and residues will make water penetration into the stone more effective.

Acids:

These are used for removing grout haze, removing mineral deposits and for rust removal from natural stone floors and natural stone floor tiles. Acidic products attack lime and cement. Use caution with acids and acidic ph products as they attack the polish on marble and limestone. Phosphoric acid, citric acid and sulfa-mic acid is preferred to sulfuric and hydrochloric acids in almost all situations due to safety and control issues.

Abrasives:

Abrasives should be limited to non-polished surfaces. Abrasives may be combined with detergents or soaps for scouring a surface and removing thin layers from the floor surface. There are many different types of materials - soft abrasives may be composed of nut shells or feldspar's, hard abrasives can be silica quartz, carbide or even diamond.

Bleaches:

Bleaches are typically oxidizing agents (generate oxygen) and are useful in stain removal. Enzyme types are available which are non-hazardous.

Leaders in the stone restoration industry throughout New Zealand –
Contact us now for a free assessment